Now that the good weather is starting and the ideal months for celebrations in which our vehicle takes centre stage are approaching (weddings, communions, Easter holidays...), it is the ideal time to get down to work and carry out the cleaning in depth of our car, putting special interest in interior corners, but also in that bodywork that we want to look like never before. If you think that the services of cleaning Whole grains are too expensive and you want to save money when cleaning your car, today since Dermo SA, company and factory specialized in the production of detergents of all kinds, including, detergents for the car body; We want to give you some tips for cleaning the bodywork of your car efficiently, in this new entry of our blog, recommending that you make use of the detergents specialized for bodywork that we offer in our facilities.
To carry out the task, you will need a water source (hose), a basin with water mixed with soap (better, as we said, detergents specific for the bodywork from the car), a soft sponge, microfiber cloths, and a clean rim broom head. Ready? Let’s get started, then.
- Place the car in a place where there is shade, otherwise you could have remains of detergent in the bodywork of the car.
- For cleaning, it is best to use warm or hot water, and cold water for rinsing. It is best to divide the task and work thoroughly on the different parts of the car to clean, separately. For example, first the ends (front and back) and then we finish with the sides. This way, we won't have to clean twice.
- The first step is to hose down the entire area with water. bodywork of the car so that we soften the encrusted dirt.
- Once we have decided which part we are going to start with, we take the sponge and immerse it in the basin (or bucket) with water and detergent for the bodywork of the car, and we soap up. It is always better to go from top to bottom, so that we can take advantage of the soap that is released and make the dirt go to the floor. When it is time to rinse, we take the microfibre cloths, wet them now only with water and remove the remains of detergent. Finally, with a very well wrung cloth we finish absorbing the humidity of the bodywork and we repeat this operation in each section of the car, but not the tires.
- Clean the bodywork, we wipe the windows with a specific product for them (window cleaner) and we polish the windshield wiper blades. What would be the use of so much cleaning What if when we use the windshield wiper it gets everything dirty again? To do it correctly, we should only use a dry and clean microfibre cloth.
- Finally, to finish leaving it as new bodywork of our car, we clean the tires. We drink water again and the same detergent for bodywork specific detergent into the bucket and dip the broom brush in it. We scrub the surface of the rims and grooves. Then, we rinse with the hose and dry with a dry cloth.
And with these simple steps, we will enjoy a car clean and we will look our best on these important days without having invested more than some time and personal dedication, with the help of products as reliable as ours. car body detergentsWe look forward to seeing you in the next entry of our blog, in Dermo SA