FORM OF USE:
Dose from 3 to 10 ml for kilo of dry clothes in the bleach phase with temperatures between 70 and 90ºC. For optimal bleaching of OXI-100 and minimal fabric damage the temperature of the wash solution at 80-90ºC and the pH between 9-10.5. Applications at hight temperatures (90ºC) and pH up to 10.5 can damage the natural fibres such as cotton. For optimal bleaching at lower temperatures (60-80ºC) the pH of wash solution should be between 11-11.5. Bleaching performance is minimal at temperatures below 60ºC. Do not use in bloodstains. In touch with the peroxide they will set and as a result, will be hard to remove, therefore, avoid the contact with OXI-100 with bloodstains in the incial phase of the wash (t=0-8 minutes). For remove bloodstains it is recommended to treat fabric in the pre-wash with a detergent and cold water. Do not use in nylon.
TECHNICAL CHARACTERISTICS
Appearance: Colorless liquid
Smell: Spicy
pH: 1 – 4
Freezing point: -52oC
Boiling point: 115oC
Relative density: 1.2 kg/l
Solubility: In water, soluble in all proportions.
COMPOSITION
Oxygen-based bleaches.
PRESENTATION
Plastic containers:
| FORMAT | 25kg |
| CODE | 002OXI25 |
SAFETY / TOXICOLOGY
Harmful if swallowed. Causes severe skin burns and eye damage. May irritate eyes.
respiratory tract. Wear protective gloves/protective clothing/eye protection. Keep out of reach of children.
In case of accident, consult the Medical Toxicology Information Service. Tel.: 915 620 420.
ADDITIONAL INFORMATION
INDUSTRIAL PRODUCT. PROFESSIONAL USE.
Regulation (EU) 2019/1148 restricts the acquisition, introduction, possession or use of this product by private individuals. All suspicious transactions, as well as significant disappearances and thefts, must be reported to the National Contact Point.
